Notes For Your XSA-100The first thing you should do is test your board. This is really easy. Plug the parallel cabel into the board, put 5V to the 5V Pin on the board, and ground the GND pin. Plug parallel cable into your computer, and run GXSTEST from the GXSTOOLS package that you downloaded for XESS. If it passes the test, most or all of the board should work. Other than that, there really isn't much trouble shooting you can do on the board directly. This is why it isn't used much. This document created by: This page created by: CJ Oster and Joe Ngai Last Modified: April 27, 2003 |
|