Wiring Your XSA-100
Initial Wiring
Connecting power to the XSA-100 Board
- Through one of several pins on the board, depending on which voltage you would want to use.
Voltage |
Connect Pin # |
Notes |
+5V |
2 |
|
+3.3V |
22 |
To use your own +3.3V supply, remove the jumper from J7. To use the +3.3 supply from the +5V supply, leave the jumper on J7 |
+2.5V |
54 |
To use you own +2.5V supply, remove the jumper from J2. To use the +2.5V supply from the +3.3V supply, leave the jumper on J2 |
GND |
52 |
|
- Through a 9V DC wall-mount power supply
Other Connections
These connections should be pretty self-explanatory, from looking on the XSA-100 board itself.
Default Jumper Settings
Jumper
| Setting
|
J2
|
J6
|
1-2 (set)
|
2-3 (osc) (default)
|
J7
|
J9
|
1-2 (xi)
|
2-3 (xs) (default)
|
J10
| N/A
|
Descriptions of what each jumper setting does can be found in the documentation.
This document created by:
This page created by: CJ Oster and Joe Ngai
Last Modified: April 27, 2003
| |
| |
|