Final Report

Video Lecture

Video, Slides

Description:

The Final Report Guidelines are the primary reference document for this assignment.

Requirements and Grading:

The Final Report is held to professional standards of language and format and is evaluated by staff in the ECE Editorial Services, who also check theses and dissertations for the department. The report is also evaluated for technical content and organization by the course staff. The Grading Rubrics are available for both English/Formatting and Technical Content , but here are some pointers:

  1. If you didn't click the link above, the Final Report Guidelines should be your first stop.
  2. Use a template to help get the formatting right (Microsoft Word template or LaTeX template).
  3. Since your Final Report is similar in purpose to a thesis, you may find the Thesis Writing Guidelines helpful for style and formatting.
  4. For citations, you may also find the IEEE Citation Reference guide useful.
  5. Please note the maximum number of pages (20) allowed for the final report. This does not include your references or appendices.You will be penalized for going over the maximum number of pages and/or not following the prescribed format.

    6. Submission and Deadlines:

    The Final Report document should be uploaded to My Project on PACE in PDF format by the deadline on the Calendar.

Assistive Chessboard

Robert Kaufman, Rushi Patel, William Sun

Assistive Chessboard

Featured Project

Problem: It can be difficult for a new player to learn chess, especially if they have no one to play with. They would have to resort to online guides which can be distracting when playing with a real board. If they have no one to play with, they would again have to resort to online games which just don't have the same feel as real boards.

Proposal: We plan to create an assistive chess board. The board will have the following features:

-The board will be able to suggest a move by lighting up the square of the move-to space and square under the piece to move.

-The board will light up valid moves when a piece is picked up and flash the placed square if it is invalid.

-We will include a chess clock for timed play with stop buttons for players to signal the end of their turn.

-The player(s) will be able to select different standard time set-ups and preferences for the help displayed by the board.

Implementation Details: The board lights will be an RGB LED under each square of the board. Each chess piece will have a magnetic base which can be detected by a magnetic field sensor under each square. Each piece will have a different strength magnet inside it to ID which piece is what (ie. 6 different magnet sizes for the 6 different types of pieces). Black and white pieces will be distinguished by the polarity of the magnets. The strength and polarity will be read by the same magnetic field sensor under each square. The lights will have different colors for the different piece that it is representing as well as for different signals (ie. An invalid move will flash red).

The chess clock will consist of a 7-segment display in the form of (h:mm:ss) and there will be 2 stop buttons, one for each side, to signal when a player’s turn is over. A third button will be featured near the clock to act as a reset button. The combination of the two stop switches and reset button will be used to select the time mode for the clock. Each side of the board will also have a two toggle-able buttons or switches to control whether move help or suggested moves should be enabled on that side of the board. The state of the decision will be shown by a lit or unlit LED light near the relevant switch.

Project Videos